Steam Pro Compact Professional Ironing System Instruction Booklet SR8200 Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions Features of your Steam Pro Compact Using your professional ironing system Care and cleaning Ironing guide Ironing chart 1 2 4 6 7 8
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR PROFESSIONAL IRONING SYSTEM. • Do not remove the boiler cap during use, as the unit is under pressure and there is a danger of scolding. Allow the unit to cool for 5 minutes before opening. • Do not leave a hot iron within reach of children.
Features of your Steam Pro Compact Iron thermostat light The iron thermostat light illuminates to indicate that the iron soleplate is heating, and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron soleplate maintains the selected temperature. Boiler cap The easy-fill boiler holds 1 litre water. Iron rest Place the iron on the heat resistant iron rest during ironing.
professional ironing system Steam release button Press and hold the steam release button to produce a constant stream of high-powered steam to reduce your ironing time and effort. Steam will not be emitted from the iron when the steam release button is not depressed. Variable temperature dial The variable temperature dial adjusts the temperature of the iron soleplate, allowing you to select the desired temperature for each garment.
Using your professional ironing system Before first use Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate. Remove any remaining adhesive by rubbing the soleplate with a cloth dampened with methylated spirits. Filling the boiler with water when cold Before filing the boiler with water, ensure that the power is turned off and the plug is removed from the power outlet. Unscrew the boiler cap. Using the funnel provided, fill the boiler with 1 litre of water.
Using your professional ironing system continued 5.Press and hold the steam release button to iron with steam. To dry iron, do not press the steam release button. Both the steam ready indicator and the boiler thermostat light will cycle on and off during ironing as the ironing system maintains the selected steam pressure and temperature level. Note: To prevent water dripping from the soleplate, only use the steam function on higher temperature settings (•• and above). 6.
Care and cleaning To clean the exterior of your appliance, wipe over with a damp soft cloth and wipe dry. Do NOT use harsh abrasives, chemical cleaners or solvents to clean the exterior of your appliance, as these will damage the surface. 6 To clean the stainless steel soleplate, use a stainless steel or metal cleaner and rub gently with a damp cloth and wipe dry. Do not use scouring pads, abrasives or harsh cleaners to clean your stainless steel soleplate as these will scratch and damage the surface.
Ironing guide Selecting the ironing temperature. Always read garment labels and follow the manufacturer’s ironing instructions. Refer to the Ironing Chart for temperature recommendations. Hints for easier ironing • Sort articles to be ironed according to the type of fabric. This will reduce the need to adjust the temperature to suit varying garments. • Start with garments requiring lower temperatures and work your way through to items requiring higher temperatures.
Ironing Chart 8 Fabric Temperature Setting Ironing Recommendation Acrylic • Dry iron on wrong side. Acetate • Dry iron on wrong side while still damp or use spray to dampen. Silk •• Iron on wrong side. Use an ironing cloth to prevent shine marks. Nylon •• Iron on wrong side while still damp or use spray to dampen. Polyester •• Iron on wrong side while still damp or use spray to dampen. Rayon •• Iron on wrong side of fabric. Viscose •• Mainly dry iron.
‘Sunbeam’ and ‘Steam Pro’ are registered trademarks of Sunbeam Corporation. Designed in Italy. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam‘s 2 Year Replacement Guarantee and National Service Network. © Copyright. SUNBEAM CORPORATION LIMITED 2003. (INCORPORATED IN N.S.W.) A.C.N. 000 006 771 Sunbeam Corporation is a division of GUD Holdings Ltd.
Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www.sunbeam.com.au is a registered Trademark of Sunbeam Corporation Limited. ACN 000 006 771. © Sunbeam Corporation Limited 2003.
