HANDVAC Model SBH-200 ______________________________________________________________________________________ In a continuous effort to improve our products, we reserve the right to change components and materials without notice.
CAUTION PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS Important Safety Instructions aWARNINGa • • • • • • • • • • • • • • • • • • To reduce the risk of fire, electrical shock, or injury when using your vacuum cleaner, follow these basic precautions: Read all instructions before using the vacuum. Do not plug into electrical supply until assembly is complete. Failure to do so could result in electrical shock or injury. Electric shock could occur if used outdoors or on wet surfaces.
TABLE of CONTENTS Important Safety Instructions ____________________________________ 2 Exploded View for Model SBH-200 _______________________________ 4 Assembling Your Vacuum_______________________________________ 5 Operating Instructions__________________________________________ 6 Changing and Cleaning the Dust Cup Filter ________________________ 6 Troubleshooting Guide _________________________________________ 7 Service for your Vacuum ________________________________________ 7 Warranty Informati
CAUTION The suction hole (1) must be open and free of obstructions at all times. Otherwise, the motor will overheat and could get damaged. EXPLODED VIEW 3 4 2 1 5 6 8 7 99 10 10 1. Suction Hole 2. Dust Cup Release Button 3. Power Switch 4. Handle 5. Dust Cup Container 6. Dust Cup Filter 7. Furniture Brush 8. Crevice Tool 9. Power Cord 10.
aWARNINGa Improper use of the power cord can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized service center. ASSEMBLING YOUR VACUUM Check all the parts and identify them against the illustration. ¾ ASSEMBLING YOUR VACUUM CLEANER Warning: Always unplug from electrical outlet before opening the Dust Cup (5). Note: Dust Cup Filter (6) must be used when operating the handvac. 1.
OPERATING INSTRUCTIONS ¾ TO OPERATE Hold the handvac firmly with your hand on the Handle (4). ¾ TURNING VACUUM ON Push the I/O Power Switch (3) to “I” position. CAUTION The Hand Vacuum is a very powerful machine. Make sure that you hold it firmly; otherwise it can slip out of your grasp and cause injury. CHANGING & CLEANING THE DUST CUP FILTER Warning: Always unplug from electrical outlet before opening the Dust Cup (5). Reminder: It is better to wash the filter after using handvac. 1. 2. 3. 4.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE REASON 1. Power Cord not firmly plugged into outlet. 2. No power in wall outlet. HAND VACUUM WILL NOT OPERATE POSSIBLE SOLUTION 1. Plug unit in firmly. 2. Check fuse or breaker. 3. Replace fuse/reset breaker. 4. Take it to the authorized dealer. HAND VACUUM WILL NOT PICK-UP OR SUCTION POWER IS WEAK 1. Dust Cup Filter is full. 2. Unit clogged. 3. Dust Cup Filter needs cleaning. 1. Empty dust cup filter (see page 6). 2. Turn unit off and unplug from wall outlet.
YOUR PRODUCT WARRANTY Staple your sales receipt here. Proof of original purchase date is needed to obtain service under warranty. LIMITED WARRANTY For one year from the date of purchase by the original owner, ORIGINS will, at its option, repair or replace any part of the appliance, which proves to be defective in material or workmanship under normal use.
