Operation Manual

6. Close storage drawer, see figure 13.
Processing bowl storage, see figure 14.
1. Place the processing bowl onto the base of
the food processor.
2. Fit the spindle over the drive shaft.
3. Fit the large universal 's' blade over
spindle.
3. Place the small bowl inside the large bowl.
4. Place the 'Variable Slicing' blade over the
spindle and then fit the processing cover to
the processing bowl.
Cord storage
The power cord can be stored by pushing it
into the back of the motor base,
see figure 15.
Fig 15
Fig 14
Storing your Zumbo Limited Edition Food Processor continued
Fig 13
11