LC9600Z
Contents Sunbeam’s Safety Precautions 2 Features of your Zumbo Limited Edition Food Processor 3 Attachments for your Zumbo Limited Edition Food Processor 5 Using your Zumbo Limited Edition Food Processor 6 Fitting/using the tools on your Zumbo Limited Edition Food Processor 8 Storing your Zumbo Limited Edition Food Processor 10 Handy hints for processing 12 Care and cleaning 13 Important instructions – retain for future use.
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR SUNBEAM FOOD PROCESSOR LC9600Z. • Always use extreme care when handling blades and cutting discs. These are extremely sharp and may cause injury if handled incorrectly. Always store blades and cutting discs in their respective covers or processing containers. • Unplug from power outlet when not in use, before putting on or taking off attachments, and before cleaning. • Do not put hot liquids into the processing bowl.
Features of your Zumbo Limited Editio Food Processor Processing cover The processing cover or lid of bowl provides a safety feature to the appliance. The appliance will not operate unless the bowl, cover and large feed pusher are correctly positioned and locked into place. 1400 watt induction motor The die-cast base houses a powerful 1400 watt motor. This motor is ideal for high load applications during processing, and provides a greater starting strength whilst maintaining speed throughout.
on Food Pushers The food pushers assist in guiding the food through the chute to ensure ingredients hit the blade vertically for best processing results. Three food pushers are included, depending on the size of the chute being used and the size of foods. For thinner foods, use the smaller internal pusher for consistent even slicing. This pusher also doubles as a measuring cup. Wide Chute At 14cm’s wide, the extra wide chute eliminates the need to cut most ingredients, to fit into the chute.
Attachments for your Zumbo Limited Edition Food Processor 1. Universal 's' blade Stainless steel smooth edged processing blade is designed for cutting, kneading, whisking and emulsifying. The second smaller ‘s’ blade is suitable for the smaller bowl. 2. Variable slicing blade The variable stainless steel slicing blade allows foods to be sliced to a variety of thicknesses, up to 7mm. This blade can not be used in the small processing bowl. 3.
Using your Zumbo Limited Edition Food Processor • Before using your Zumbo Limited Edition Food Processor, familiarise yourself with all parts, remove all promotional and packaging materials. Use caution when handling blades, as blades are sharp. 3. Rotate the handle clockwise to lock, as indicated by the graphics on the left side of the motorbase, see figure 2. • Wash the processing bowl, processing cover and all attachments in warm water using a mild detergent. Dry each part thoroughly before use.
Using your Zumbo Limited Edition Food Processor continued Important: If the processing bowl, processing cover and large pusher are not correctly assembled, the food processor will not operate. This is a safety feature. Using your Food Processor 1. Plug the power cord into a 230-240V AC power outlet and turn the power ‘ON’. 2. Using the START/STOP button on the control panel, press once to start processing. he Pulse function remains on as long as the T Pulse button is pressed down.
Fitting/Using the tools on your Zumbo Limited Edition Food Processor Note: All attachments must be firmly attached to the spindle. Always adjust the attachments until you are sure that they are correctly fitted. Placing the spindle 1. Fit the spindle onto the drive shaft, see figure 4. 3. Place food into the processing bowl. 4. Fit the processing cover to the processing bowl, see figure 3 and place the food pusher in the feed chute. 5.
Fitting/Using the tools on your Zumbo Limited Edition Food Processor continued Reversible grating/shaving, shredding and julienne discs 1. Fit the processing bowl and spindle as detailed previously, in figures 1, 2 and 4. 2. Select the 'Reversible' disc of your choice – Shredding (fine or coarse), Grating/Shaving or the dedicated Julienne disc. Variable slicing blade 1. Fit the processing bowl and spindle as detailed previously in figures 1, 2 and 4. 2.
Storing your Zumbo Limited Edition Food Processor The Zumbo Limited Edition Food Processor was designed so that all attachments can be stored within the unit itself, see figure 8. 3. Place one of the 'Reversible discs' in storage drawer as indicated in figure 10. Fig 10 4. Place the 'Julienne Disc' in the storage drawer as indicated in figure 11. Fig 8 Storage drawer he 'Julienne Blade', 'Reversible Shredding' T disc, 'Reversible Grating and Shaving' disc are all stored in the storage drawer. 1.
Storing your Zumbo Limited Edition Food Processor continued 6. Close storage drawer, see figure 13. Fig 13 Processing bowl storage, see figure 14. 1. Place the processing bowl onto the base of the food processor. 2. Fit the spindle over the drive shaft. 3. Fit the large universal 's' blade over spindle. 3. Place the small bowl inside the large bowl. 4. Place the 'Variable Slicing' blade over the spindle and then fit the processing cover to the processing bowl.
Handy hints for Processing Chopping For the best, most consistent results, you should try to process pieces of food that are approximately equal in size. When you break, cut or tear food into uniform pieces before you begin processing, the finished results will be more uniform. Mincing Pre-cut meat into cubes approximately 2cm square. Adding Ingredients When various recipes require dry ingredients such as flour, add them directly into the processing bowl before processing.
Care and cleaning When you have finished processing, unplug the Cafè Series® Food Processor from the power outlet. All accessories and processor tools can be washed in hot soapy water except for the processor body. Clean the processor body by wiping with a damp cloth. Warning: Care must be taken when handling the metal blades as these items are extremely sharp. Note: Always unplug the Cafè Series® Food Processor before cleaning.
Notes 14
The Sunbeam 10 Year Motor Guarantee Sunbeam has built its reputation on manufacturing quality electrical appliances. Our Zumbo Limited Edition Food Processor is constructed from the highest quality materials. So much so, we guarantee our Food Processor motor for ten (10) years against faulty materials or manufacture. This guarantee is just another expression of our confidence in the way we make appliances at Sunbeam.
12 Month Replacement Guarantee In the unlikely event that this appliance develops any malfunction within 12 months of purchase (3 months commercial use) due to faulty materials or manufacture, we will replace it for you free of charge. Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. Made in China. Designed and engineered in Australia. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright. Sunbeam Corporation Limited 2016.
