User Manual

98
• Position the processing bowl on the
motor base, with the processing lid off.
The handle of the bowl needs to be facing
you. Rotate the processing bowl counter-
clockwise to lock into position.
• Select the desired processing attachment
and place onto the spindle.
• Insert the spindle into the processor
bowl by placing it on top of the processor
coupling in the centre of the bowl. If
needed rotate the spindle a little until it
falls down into place.
• Place the processing bowl lid onto the
processing bowl. Rotate the processing
lid towards the handle (counter-
clockwise) to lock the lid into position.
• Plug the power cord into a 230-240V AC
power outlet and turn power ‘ON’.
• Using the control dial, select the desired
processing speed. The two speeds on
the speed dial, will provide continuous
processing until the control dial is
returned to the ‘OFF” position.
• The food processor will only start
processing when the large pusher is
inserted into the extra wide chute.
• The pulse function remains on long as
the pulse button is pressed down.
• Further ingredients can also be added
whilst processing by pouring through the
feed tube once the food pusher has been
removed.
• After you have completed processing,
turn the control dial to the ‘OFF’ position.
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
LARGE
PUSHER
SMALL
PUSHER
Chopping
For the best, most consistent results, you
should try to process pieces of food that
are approximately equal in size. When you
break, cut or tear food into uniform pieces
before processing, the finished results will
be more uniform.
More consistent processing results are
achieved if the processing bowl is not
overloaded.
Mincing
Pre-cut meat into cubes approximately 2cm
square.
Vegetables
When processing vegetables such as
onions, peel and quarter or cut large
vegetables into eighths.
Mixing
The quantities that can be processed within
the processing bowl will vary with the
density of the mixture.
Adding ingredients
When various recipes require dry
ingredients such as flour, add them directly
into the processing bowl before processing.
There is no need to sift ingredients
when using your Multi Processor. Liquid
ingredients may be added while the
processor is operating by pouring through
the feed tube in the processor lid.
Using the Feed Tube
The most important factor for successful
slicing and shredding is the way in which
the food is packed into the feed tube.
Slicing, shredding and grating
Cut all ingredients to a size that fits
comfortably into the feed tube. Pack the
feed tube and, while holding food steady
and upright with the food pusher, press
down evenly until all ingredients are sliced
or shredded. The more firmly you push,
the thicker the slices or shreds. Do not use
excessive force or you may damage the food
processor.
For best results when slicing
The feed tube should always be packed
firmly to allow each piece of food to support
the others. There will always be a small
portion of food left unprocessed between
the food pusher and the blade.
For best results when shredding and
grating
Remember that softer foods such as
cheese (cheddar, mozzarella or swiss)
should be well chilled before processing.
Harder foods such as parmesan or Romano
cheese should be at room temperature
before processing.
Disassembly
When processing is completed, remove
the lid from the processing bowl first and
then remove the processing bowl with the
processing blade still in place.
To remove the processing bowl firstly
unlock the processing bowl lid by rotating
it in a clockwise direction until the lid is
unlocked.
Tips for the best Food Processing Results
Note: Never use fingers to push food
down the feed tube. Always use the food
pusher.
Note: When grating parmesan cheese
do not apply a lot of pressure to the food
pusher.
Note: Always wait for the processing
blade to stop moving completely before
removing the bowl lid.
Note: When processing sauces or semi-
liquid ingredients, stop the food processor
and scrape down the bowl sides with a
spatula.
CAUTION: Use extreme caution, as blades
are sharp. Always handle the processing
blade by the plastic central section.
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
LARGE
PUSHER
SMALL
PUSHER
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
LARGE
PUSHER
SMALL
PUSHER
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
LEVEL
QUID
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
PULSE
0
1
2
LEVEL
FOOD
MAX
LEVEL
LIQUID
MAX
LARGE
PUSHER
SMALL
PUSHER
Using your Food Processor
Important: When mixing a heavy load i.e 0.5kg
dough, do not operate the food processor for
more than 38 seconds at a time.
Important: If the processing bowl and lid
are not correctly assembled, the Multi
Processor will not operate.
Note: For maximum control when using
your food processor, load the feed tube
before turning on your food processor.
Always use the food pusher for more
evenly processed foods and never use
your fingers.
Note: The small pusher cannot be used
by itself. It must be used with the larger
pusher to activate the interlock.
LC5500_LC3680_LC6500_LC3266_17EM3.indd 8-9 12/12/17 09:58