User Manual

76
All of the food processor attachments
can be conveniently stored within the
processing bowl for easy storage.
Make sure the removable processor
coupling is locked into the processing bowl.
Firstly place the processing blade (with
protective cover) over the spindle, making
sure the blade is at the lowest position on
spindle. Then place in the processing bowl
over the processor coupling.
Then place the dough blade on top of the
processing blade, it will not lock in, just
rest on top.
Then place the whisk over the spindle so it
rests on top of the dough blade.
Then the disc blades can now be placed
vertically down the sides of the processing
bowl.
Lastly place the blade holding disc on top of
the spindle.
The processing lid with the two food
pushers can be positioned & locked into the
processing bowl as usual.
The power cord can be stored within the
cord storage area at the back of the motor
base.
Disc
Blades
Dough
Blade
Whisk
Processing
Blade
Protective
Cover
Blade
Holding
Disc
Spindle
Motor Base
Clean the motor body by wiping with a
damp, soft sponge with mild detergent.
Food Processor
When you have finished processing, unplug
your Multi Processor from the power outlet.
Wash all accessories, attachments and all
surfaces that have come into contact with
food in warm soapy water.
• Dishwasher use
All plastic components deteriorate through
the prolonged use of a dishwasher for
cleaning.
Blender (LC6500 Only)
• Quick cleaning method
Half fill the blender with warm water and
a small amount of detergent. Press the
PULSE button for 10-20 seconds. Then
remove the jug and rinse it under running
water.
• For thorough cleaning
Wash the lid, ingredient cup, rubber seal,
glass jug with fixed blade assembly in
warm soapy water.
CAUTION: To prevent damage to the
appliance do not use alkaline cleaning
agents when cleaning the exterior.
PULSE
0
1
2
Step 1. Remove Packaging
Ensure all packaging has been removed.
Step 2. Position Machine
Place the motor base facing you on a dry,
level surface.
Step 3. Wash Parts
Wash the processing bowl, lid and all
attachments in warm water using a mild
detergent. Dry each part thoroughly before
use.
Step 4. Power
Before you assemble the food processor (or
blender for LC6500 only), ensure that the
power cord is unplugged.
Before First Use of the Multi Processor Storing your Food Processor Attachments
Care & Cleaning
Note: Always unplug the Multi Processor
before cleaning.
Note: Never immerse the motor base in
water or any other liquid.
Note: Do not clean any part of the
blender in the dishwasher.
Note: Wash & dry each attachment
thoroughly before storing.
CAUTION: Care must be taken when
handling the metal blades as these
items are extremely sharp.
CAUTION: Care must be taken when
handling the metal blades as these
items are extremely sharp.
Processor
Coupling
Processing
Bowl
LC5500_LC3680_LC6500_LC3266_17EM3.indd 6-7 12/12/17 09:58