user manual

Care and Cleaning (continued)
8. Shaketheunitbackandforthto
dislodgeanyscalebuilduponthe
baseoftheboiler.Leavefor10
minutes.
9. Shaketheunitagaintoswirlthe
solutionaroundinsidetheboiler.
10.Placetheunitonasinkorvesselso
thatsolutioncanbeexpelledfromthe
boiler.
11.Carefullyremovethecalccleanvalve
andensurethedescalingsolutionis
emptied.
12.Rinsewith400mlofwater(90degrees
isrecommended)cleanwater,shake
andempty.Repeatrinsingprocessat
least2times.
13.Onceyouhavecompletedthe
descalingprocess,andrefilledthe
tank,pressandholdthePowerbutton
for3secondstoswitchofftheCalc
Cleanindicatorlight.Thepowerlight
willilluminateandtheunitwillbegin
heatingasnormal.
13