Pro Steam Travel Steam and dry iron Instruction Booklet SR2300 Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions 3 Features of your Travel Iron 4 Using your Travel Iron 6 Care and Cleaning of your Travel Iron 7 Important instructions – retain for future use.
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR IRON • Do not leave a hot iron within reach of children. If they come into contact with a hot iron it could lead to serious burns. • Iron only on an ironing board. • An iron takes approximately 30 minutes to cool down. Allow the iron to cool completely before storing. • Do not wind the cord around the soleplate while the iron is still hot. • The iron is not intended for frequent use.
Features of your Sunbeam Travel Iron Powerful shot of steam Pressing the shot of steam button instantly produces a powerful shot of steam to remove stubborn wrinkles. Vertical shot of steam Pressing the shot of steam button with the iron in an upright position produces a vertical shot of steam, which is ideal for refreshing hanging garments and delicate fabrics. Steam/dry dial Offers a choice of steam or dry ironing, making it suitable for use on a variety of fabrics.
Thermostat light Illuminates to indicate that the iron is heating and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron maintains the selected temperature. 1.8 metre cord Dual voltage selector Select the correct voltage for the country of use, 110-120V or 230-240V. Temperature indicator Align the desired setting with the temperature indicator.
Using your Sunbeam Travel Iron Before first use Remove any adhesive stickers, plastic covers or cardboard sleeves from the soleplate. Ensure that all adhesive is removed by rubbing the soleplate with a cloth dampened with methylated spirits. Fill the water tank and empty the water. This will rinse out any foreign particles remaining in the water tank from the manufacturing process. NOTE: When turned on for the first time, your new iron may give off vapours for up to 10 minutes.
Using your Sunbeam Travel Iron (Continued) Dry ironing Using the shot of steam Follow steps 1 to 3 on page 6 under "Using your iron". The shot of steam can be used when dry or steam ironing, when the temperature dial is set to the three dot (•••) temperature setting. 4. Select DRY on the STEAM/DRY dial. This will cut off the steam flow if there is water in the tank. Steam ironing Follow steps 1 to 3 on page 6 under "Using your iron".
Notes
Notes
Notes
2 Year Replacement Guarantee In the unlikely event that this appliance develops any malfunction within 2 years of purchase (3 months commercial use) due to faulty materials or manufacture, we will replace it for you free of charge. Should you experience any difficulties with your appliance, please phone our customer service line for advice on 1300 881 861 in Australia, or 0800 786 232 in New Zealand. Alternatively, you can send a written claim to Sunbeam at the address listed below.
Need help with your appliance? Contact our customer service team or visit our website for information and tips on getting the most from your appliance. In Australia Visit www.sunbeam.com.au Or call 1300 881 861 In New Zealand Visit www.sunbeam.co.nz Or call 0800 786 232 is a registered trademark. ‘Pro Steam’ is a trademark of Sunbeam Corporation. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. © Copyright.
