Quick Guide

Let’s get you startedEspresso extraction guide
CAFÉ SERIES DUO
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
MILK JUG
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
S
INSERT
THERMOBLOCK
58MM CAFÉ GROUP HEAD
Insert the power plug into the power outlet and switch the
power on. Press the STANDBY button to turn on the machine.
When lights become solid, machine is ready to use.
Remove water tank from the back or fill
directly from the top water tank lid.Fill
with cold filtered water.
Insert 2 CUP filter
basket into group
handle.
Insert group handle
into group head, turn
to centre.
Press 2 CUP button.
Allow water to run
through until it stops.
Rotate steam lever to
ON position and run
for 20 sec.
Return steam lever
to OFF position.
5. Prime machine
2. Wash and dry parts1. Unbox and remove accessories
3. Fill and insert water tank
4. Start up
Everything you need to know after unboxing your
new coffee machine. Scan the QR Code to watch
the Quick Start Guide and other how-to videos.
EMM7200
Remove group handle, tamper and
measuring spoon from side polyfoam.
Locate filter baskets under water tank lid.
Wash the milk jug, 1 CUP & 2 CUP filter baskets, group handle,
tamper and water tank in warm water with a mild detergent.
Rinse and allow thorough air drying.
Note: Turning group handle might be tight for first few uses.