Download

Using your DimpleTech
™
Frypan
Before the first use: Wash in warm soapy
water, rinse thoroughly and dry your pan and
lid.
1. Insert the Control Probe into the inlet on
the frypan.
2. Plug the cord into a 230-240V power
outlet and turn the power on.
3. Pre-heat the frypan to MAX setting.
Then set the Control Probe Dial to the
desired temperature setting. Refer to
page 6 for the temperature guide.
The light on the control probe will illuminate.
This light will remain on until the set
temperature has been reached and then will
cycle on and off throughout cooking, as the
cooking temperature is maintained by the
thermostat.
Hint: On initial heating of the cookware,
it is recommended that the temperature be
allowed to cycle (the light glowing on and
off) several times. This will help the cooking
surface to adjust to a more accurate cooking
temperature.
Note: The frypan must only be used with the
Control Probe provided.
Using the pan tilt lever
The pan tilt lever is positioned under the
inlet where the control probe is inserted.
To tilt the frypan, push the lever down.
This allows the fat and juices to drain from
the food for crisp, low fat cooking. It also
makes it easier to baste food and serve
sauces or gravy.
7