user manual
2
Using your SmartBake
®
 Custom 
Safely
Before use
1.  Read all instructions, product labels and 
warnings. Save these instructions.
2.  Remove all foreign matter from the  
bread pan.
3.  Wipe over bread pan and kneading blade 
before use.
4.  Peel off plastic film from control panel and 
remove all static labels.
5.  Always use the breadmaker from a 230-
240V AC power outlet.
6.  Do not allow anything to rest on the power 
cord or allow it to touch any hot surface.  
Do not plug in the cord where people 
may walk or trip on it or allow the cord 
to dangle over the edge of a table or 
benchtop.
Whilst in use
1.  This breadmaker does get warm during 
operation. Be careful to keep your hands 
and face away from the unit.
2.  Do not open the lid or remove the bread 
pan during operation except as indicated in 
the instructions.
3.  Do not place anything on the breadmaker 
lid. Do not cover vents.
4.  This breadmaker unit has built-in Power 
Interruption Program Protection to 
maintain your baking cycle, if there is an 
interruption in your power supply (black 
out). Any extended power outage may 
result in the program being cancelled see 
page 24 for full details.
5. Do not touch moving parts.
Where to use
1.  Use only on a stable, heat-resistant 
surface.
2.  Do not use the breadmaker where it will 
be exposed to direct sunlight or other heat 
sources, such as a stove or oven.
3.  Do not place on top of any other appliance.
4.  Keep the breadmaker out of reach of 
children as it does get quite warm. Also, 
if any buttons are accidentally touched 
during operation, baking may stop.
5.  Place the unit at least 50 millimetres  
away from walls as they may discolour  
from the heat.
After use
1.  Always turn the unit off and remove the  
plug from the power outlet after use,  
and before cleaning.
2.  Use oven mitts when taking out the baking 
pan after baking.
3.  Allow the breadmaker to cool down before 
cleaning or storing.
4.  Read instructions before cleaning. Do not 
immerse the unit or plug in water. This will 
cause electric shock or damage to the unit.
Safety Precautions
1.  Do not use attachments not recommended 
by Sunbeam. They may cause fire, electric 
shock or injury.
2.  Do not use outdoors or for commercial use, 
or for any purpose other than its intended 
use.
3.  Do not operate the unit if the cord or plug  
is frayed or damaged. Do not operate if the 
appliance has been dropped or damaged 
in any manner. Return appliance to the 
nearest Sunbeam Appliance Service Centre 
for examination, repair or mechanical or 
electrical adjustment. 
4.  Remove the plug by grasping the plug - do 
not pull on the cord.










