User's Manual

Followtheinstructionsbelowforthetypeof
electric blanket you have purchased.
Adouble/queensizeelectricblanketcan
safely be used on a double bed, providing the
heating wires do not overhang the edge of the
mattress.Donottuckin.
Fitted electric blankets
Placetheelectricblanketonyourmattress
with the control sockets on the underside of
the blanket near the head of the bed (see
Figure3).Ensuretheheatingwiresdonot
extendunderthepillows.
AsingleorkingsingleFittedorAntibacterial
electric blanket can be turned over so that
the control is on the preferred side of the bed
ifdesired.Pleasenotethatthismayresultin
the control facing towards the bed once the
bed is made.
Pulltheelasticcordinsidethefittedskirt
overthetopcornersofthemattress.Tofit
the foot of the bed, pull from the centre of
the blanket to the foot of the bed, and fit one
corner at a time while holding the centre
(seeFigure4).
Ensure the fitted skirt and elastic cord go
completelyunderthemattress.Pullonthe
edges of the blanket to ensure that it is flat
and square on the mattress.
Fitting your electric blanket
12
Figure 3.
Figure 4.