Operation Manual

50 Netra t 1400/1405 Installation and User’s Guide • September 1999
System ON/STBY Switch
The system switch of the Netra t 1400/1405 is a rocker, momentary switch which
functions as a standby device only, controlling logic circuits which enable power
module output.
▼ To Power On the System
1. Prior to powering on, inspect the supply conductors for correct polarity and
mechanical security.
2. Activate the external circuit breaker(s), or plug it into the mains supply.
3. Set the front panel ON/STBY system switch to the ON position and hold it until
the system starts to power up.
FIGURE 7-3 System Power-On (Front Panel)
1400
1405
1400
LW3User.book Page 50 Wednesday, November 10, 1999 9:00 AM