Operation Manual

39
CHAPTER
5
Installing the Alarms Software
This chapter describes the procedure for installing a Netra t 1400/1405 LOMlite
alarms software release. In order to do this you should be familiar with the Solaris
operating environment. Procedures for local and network installation are provided.
The release software consists of a CD-ROM containing the following packages:
SUNWlomm, SUNWlomr, SUNWlomu
SUNWtsvts, SUNWtsvtx
Local Installation
To perform a local installation, your Netra t 1400/1405 must be equipped with a
CD-ROM drive.
Installation Procedure
1. Log on as root.
2. Insert the Lights Out Management release CD-ROM in the drive.
3. Add the packages to the system:
4. Verify that the packages have been installed successfully.
% pkgadd -d /cdrom/cdrom0/Product SUNWlom*
% pkgchk -v SUNWlom[m|r|u]
LW3User.book Page 39 Wednesday, November 10, 1999 9:00 AM