Operation Manual

24 Netra t 1400/1405 Installation and User’s Guide • September 1999
▼ To Power On the System
1. Prior to powering on, inspect the supply conductors for correct polarity and
mechanical security.
2. Activate the external circuit breaker(s).
3. Set the front panel ON/STBY system switch to the ON position and hold it until
the system starts to power up.
FIGURE 3-13 System Power-On (Front Panel)
1400
1400
LW3User.book Page 24 Wednesday, November 10, 1999 9:00 AM