Manual

2. Safety Instructions
Sun Pumps strongly suggests to carefully read this operation manual before using and installing its
products.
Any operation (installation, maintenance and repair) must be carried out by trained, skilled and
qualified personnel. Failure to observe and follow the instructions of this manual may result in fatal
electric shock.
Disconnect the unit from the power supply before any maintenance
is performed.
Do not remove for any reason, the cover of the CM MP and the
cable guard without having visually disconnected the unit from the
power supply and having waited at least 1 minute. This allows the
capacitors to bleed off their stored power.
CM MP and pump system must be grounded properly before
operation.
High voltage is present even if the pump is not running.
Do not start the pump for any reason unless the pump is completely
immersed in water.
Avoid shock or serious impact during transportation.
Check the product immediately upon delivery and check for damage and/or missing parts. In either
case, immediately notify the supplier.
Damages due to transportation, incorrect installation, or improper use of the device will null and
void the warranty. The manufacturer cannot be held responsible for any damage to people
and/or property due to improper use of its products.
4