Server Module Installation Guide
Table Of Contents
- Sun Blade™ X6450 Server Module Installation Guide
- Contents
- Preface
- Introduction
- Installing and Configuring the Server Module
- Installation Worksheet
- Using the BIOS Configuration Utility to Configure the Sun Blade RAID 5 Expansion Module
- Introduction to the BIOS RAID Configuration Utility
- Understanding Hot-Plug Limitations and Conditions Within the BIOS RAID Configuration Utility
- Running the BIOS RAID Configuration Utility
- Using the ACU to Create and Manage Arrays
- Using the -Select Utility to Modify REM Settings
- Using the Disk Utilities to Manage Disk Drives
- Initializing a RAID Array
- Index
Appendix B Using the BIOS Configuration Utility to Configure the Sun Blade RAID 5 Expansion Module 49
▼ To Navigate the BIOS RAID Configuration
Utility
● Use the arrow keys, Enter, Esc, and other keys on your keyboard to navigate
through the utility menus.
All the tools within the BIOS RAID Configuration utility are menu-based and
instructions for completing tasks are displayed on-screen.
Using the ACU to Create and Manage
Arrays
You can use the ACU, a tool of the BIOS RAID Configuration utility, to create and
manage arrays. This section contains the following subsections:
■ “To Start the ACU” on page 50
■ “To Create a New Array With the ACU” on page 50
■ “To Manage Existing Arrays With the ACU” on page 51
■ “To Make an Array Bootable With the ACU” on page 51
■ “To Initialize Disk Drives With the ACU” on page 51
■ “To Rescan Disk Drives With the ACU” on page 52
■ “To Perform a Secure Erase on Disk Drives With the ACU” on page 52
■ “To Stop a Secure Erase in Progress With the ACU” on page 52