- Sun GigaSwift Ethernet Adapter Installation and User's Guide (February 2003)

10 Sun GigaSwift Ethernet Adapter Installation and User’s Guide • February 2003
2. Insert the Sun GigaSwift Ethernet Driver 1.0 Update 1 CD into a CD-ROM drive that
is connected to your system.
■ If your system is running Sun Enterprise Volume Manager™, it should
automatically mount the CD-ROM to the /cdrom/cdrom0 directory.
■ If your system is not running Volume Manager, mount the CD-ROM as follows:
You will see the following files and directories in the
/cdrom/sun_gigaswift_ethernet directory or the
/cdrom/cdrom0 directory, depending on how you mounted the CD-ROM.
Note – If you intend to use VLAN, you must install VLAN packages when you
install the GigaSwift Ethernet software packages.
# mkdir /cdrom
# mkdir /cdrom/cdrom0
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0
TABLE 2-1 Files and Directories on the CD-ROM
File or Directory Contents
Copyright U.S. copyright file
FR_Copyright French copyright file
Docs/ Contains PDF copy of the user manual
GigaSwiftEthernet/
Solaris_OS-VER/
Packages/
Contains the Sun GigaSwift Ethernet software packages
applicable to your version (OS-VER) of the Solaris software
• SUNWcea—32-bit adb macros
• SUNWceax—64-bit adb macros
• SUNWced.u—32-bit adapter driver
• SUNWced.u1—32-bit adapter driver for Solaris 2.6 Sun
Enterprise 10000
• SUNWcedx.u—64-bit adapter driver
• SUNWcedu—adapter driver headers
• SUNWcem—man pages (optional)
The optional VLAN packages for Solaris 8 only
• SUNWvld—VLAN utility routines
• SUNWvldx—VLAN utility routines (64-bit)
• SUNWvldu—VLAN utility headers