- Sun Storage Virtual Tape Library VTL User Guide

Managing network connectivity

30 VTL User Guide • May 2008 G • 96267

NotetheEnable SSH,Enable FTP,andAllow root to login in telnet

sessioncheckboxes.Whilesshisenabledbydefault,ftpandremote loginby

rootaredisabledforsecurityreasons.Sunrecommendsthatyouleavetheseoptions

settothedefaults.Forsecureremote access,usethevtladminaccountwithsshor

sftp.Then,

ifrootprivileg esarerequired,usethesucommandafterloggingin.

10. Whenyoureturntothe Network Configuration propertysheet,clickOK

(

N above).

11. Whenyouarepromptedtorestart thenetwork,press Yes (

O below).

Thenetworkshouldrestartautomatically.

12. Reconnect totheVTLservernode.

Stophere.

▼ SettingtheVTL servernodehostname

1. WhentheSet Hostnamedialogappears,en ter avalidnameforyourVTL

appliance(

A below).

Validcharactersinclude letters,numbers,underscores,anddashes.

2. PressOK(

B above).