- Sun Storage Virtual Tape Library VTL User Guide

Running the VTL console application

20 VTL User Guide • May 2008 G • 96267

RunningtheVTLconsoleapplication

▼ LaunchingtheVTL cons ole

1. TolaunchtheconsoleonaSunSolarisworkstation,openaterminalwindowand

enterthecommandshownbelow:

2. OnaMicrosoftWindowssystem,presstheStartbartoaccessthe mainmenu 

system,andselectAll Programs > Sun Microsystems > VTL 5.0 > VTL

Console.

3. TolaunchtheconsoleonaLinuxworkstation,openaterminalwindowand

enter

thecommandshownbelow:

Stophere.

Populatingtheconsole

Oncetheconsoleisrunning,youcanspecifytheVTLserversthatyouwanttoseein

theobjecttree attheleftsideoftheVTLconsole.Youcandiscover,add,orremove

servers:

■ “DiscoveringVTLservernodes”onpage 20.

■ “A d d i n g aservernodetotheconsoletree”onpage 21

■ “Deletingaservernodefromtheconsoletree ”onpage 22

▼ DiscoveringVTLserver node s

WheneveraVTLserverisaddedtothesubnetmanagedby aVTLconsole,youcan

discoverthenewadditionanditspropertiesusingtheprocedurebelow.

% /usr/local/vtlconsole/vtlconsole &