- Sun Storage Virtual Tape Library VTL User Guide

246 VTL User Guide • May 2008 G • 96267
1074 Error Replication cannot proceed -- unable to allocate memory.
1075 Error Replication cannot proceed -- unexpected error %1.
1076 Informational Starting replication for virtual device %1 of group %2 to replica device %3.
1077 Informational Replication for group %1 has completed successfully.
1079 Error Replication for group %1 has failed due to error on virtual device %2
1082 Error Replication for virtual tape %1 has been manually aborted by user
1083 Error Replication for group %1 has been manually aborted by user
1084 Error A SCSI command terminated with a recovered error condition. This may indicate
that the device is becoming less reliable. Please check the system log for
additional information.
1085 Error for virtual device %1 has been auto-disabled due to an error.
1086 Error Replication cannot proceed -- failed to load the virtual tape %1.
1087 Error Replication cannot proceed -- virtual tape %1 is in the drive.
1088 Error Replication cannot proceed -- failed to set initialization status in
VirtualLibrary System for virtual tape %1.
1089 Informational No data has been updated to the virtual tape %1 since last replication.
Replication is completed without updating the replica.
1201 Warning Kernel memory is low. Add more memory to the system if all possible! Restart
the host if possible.
1202 Informational Path trespassed to %1 successfully.
1203 Error Path failed to trespass to %1.
1204 Error Failed to add path group. ACSL: %1.
1205 Informational Activated path successfully: %1.
1206 Error Failed to activate path: %1.
1207 Error Critical path failure detected. Path %1 will be removed.
1208 Warning Path %1 does not belong to active path group.
1209 Informational Rescan the FC adapters is recommended to correct the configuration.
1210 Warning No valid path is available for device %1.
1211 Warning No valid group is available.
1212 Warning "No active path group found. Storage connectivity failure. Check cables,
switches and storage system to determine cause. GUID: %1."
1213 Informational Storage device added new path: %1.
1214 Error Failed to add path: %1.
2000 Informational Path status has changed : %1
7000 Informational Patch %1 installation completed successfully.
7001 Error Patch %1 failed -- environment profile is missing in /etc.
Trap Severity Message