- Sun Storage Virtual Tape Library VTL User Guide

244 VTL User Guide • May 2008 G • 96267
1020 Informational Replication for virtual tape %1 started.
1021 Informational Replication for virtual tape %1 finished.
1022 Warning Replication has failed for virtual tape %1 -- %2.
1023 Error Failed to connect to physical device %1. Switching alias to %2.
1024 Informational Device %1 has attached to the VTL Server.
1025 Informational Device %1 has detached from the VTL Server.
1026 Informational Replication has been started for virtual tape %1; it was triggered by the
watermark.
1027 Informational Replication has been started for virtual tape %1; it was triggered by the
interval schedule.
1028 Informational Replication has been started for virtual tape %1; it was triggered by the time
of day schedule.
1029 Informational Replication has been started for virtual tape %1; it was manually triggered by
the administrator.
1030 Error Failed to start replication -- replication is already in progress for virtual
tape %1.
1031 Error Failed to start replication -- replication control area not present on virtual
tape %1.
1032 Error Failed to start replication -- replication control area has failed for virtual
tape %1.
1034 Error Replication failed for virtual device %1 -- the network transport returned
error %2.
1035 Error Replication failed for virtual device %1 -- the local disk failed with error
%2.
1038 Error Replication failed for virtual device %1 -- the local server could not
allocate memory.
1039 Error Replication failed for virtual device %1 -- the replica failed with error %2.
1040 Error Replication failed for virtual device %1 -- failed to set the replication
time.
1041 Informational Mirror synchronization started for virtual device %1.
1042 Informational Mirror synchronization finished for virtual device %1.
1043 Error A SCSI command terminated with a non-recoverable error condition that was most
likely caused by a flaw in the medium or an error in the recorded data.
Please check the system log for additional information.
1044 Error "A SCSI command terminated with a non-recoverable hardware failure (for
example, controller failure, device failure, parity error, etc.). Please
check the system log for additional information."
1045 Informational Rescan replica has completed for virtual device %1
1046 Error Rescan replica has failed for virtual device %1 -- the local device failed
with error %2.
Trap Severity Message