- Sun Storage Virtual Tape Library VTL User Guide

Physical devices
212 VTL User Guide • May 2008 G • 96267
Getphysicaldeviceinformation
iscon getpdevinfo -s <server-name> [-u <username> -p <password>]
[-F [-M | -C <category>] | [-a] [-A] [-I <ACSL>] ] [-o <output-format>]
[-X <rpc-timeout>]
iscon getpdevinfo --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
[--config [--include-system-info | --category=<category>] |
[--allocated-list] [--available-list] [--scsiaddress=<ACSL>] ]
[--output-format=<output-format>] [--rpc-timeout=<rpc-timeout>]
Description:
‐F(‐‐config)isanoptiontogetthephysicaldeviceconfigurationinform ation .The
defaultisto exclude thesystemde viceinformatio n.
‐M(‐‐include‐system‐info)isanoptiontoincludethesystemdevicein form ation .
‐C(‐‐category)isanoptiontobeusedasafiltertoget
theconfigura tion in formati on
forthespecifiedcategorywithoneofthevalues:virtual(de fault)orservice‐enabledor
direct.
The‐M(‐‐include‐system‐in fo)and‐C(‐‐category)optionsaremutuallyexclusive.
‐o(‐‐output‐format)istheoptiontospecifytheoutputformat.The<output‐format>
forthe‐F
(‐‐config)optionisoneofthe followingvalues:listordetailorguidorscs i.
‐a(‐‐allocated‐list)isan optiontogettheallocatedphysicaldeviceinformation.
‐A(‐‐available‐list)isanoptiontogettheavailablephysicaldeviceinformation.
‐I(‐‐scsiaddress)isanoption
tospecifytheSCSIaddressas a devicefilterinthe
followingformat:<ACSL>=#:#:#:#(adapter:channel:id:lun)
The<outpu t‐format>forthe‐a(‐‐allocated‐list)andthe‐A(‐‐available‐li s t )optionsis
oneofthefollowingvalues:listordetailorsize‐only.
‐F(‐‐config),and‐a(‐‐allocated‐
list)and/or‐A(‐‐available‐list)aremutually
exclusive.Youcaneithergettheconfigurationinform ati onorgettheallocation
information.Whengettingtheallocationinformation,youcanspecifyeither‐a(‐‐
allocated‐list),or‐A(‐‐available‐list)orboth.Thedefaultistodisplayboththe
deviceallocationand
availabilityinformationifnoneoftheoptionsisspec if ied.
‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and30000inseconds
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountof time
specifiediftheserverdoesnotrespond.Thedefault
RPCtimeoutis30seconds.