- Sun Storage Virtual Tape Library VTL User Guide

Physical devices
208 VTL User Guide • May 2008 G • 96267
Stopreplication
iscon stopreplication -s <server-name> [-u <username> -p <password>]
-v <vdevid> [-X <rpc-timeout>]
iscon stopreplication --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
-vdevid=<vdevid> [--rpc-timeout=<rpc-timeout>]
Thiscomma n d allowsyoutost opthereplica ti on thatisinprogressfora virtual
device.
‐v(‐‐source‐vdevid)istheIDof thesourcevirtualtapeontheprimaryservertostop.
‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and
30000inseconds 
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountof time
specifiediftheserverdoesnotrespond.ThedefaultRPCtime outis30seconds.
Physicaldevices
Inventoryphysicaltapelibrary
iscon plibinventory -s <server-name> [-u <username> -p <password>]
[-l <physical-tape-library-vid>] [-X <rpc-timeout>]
iscon plibinventory --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
[--plib-vid=<tape-library-vid>] [--rpc-timeout=<rpc-timeout>]
Description:
Thiscommandperformsaninventoryofthephysicaltapesinaphysi c al tapelibrary.
‐l(‐‐plib‐vid)isanoptiontospeci fythephysicaltape librarytoperformthe
inventory.
Inventoryoperationwillbeperformedforallthephysicaltapelibrariesif‐l(‐‐plib‐
vid)is
notspecified.
‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and30000inseconds
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountof time
specifiediftheserverdoesnotrespond.ThedefaultRPCtime outis30seconds.