- Sun Storage Virtual Tape Library VTL User Guide

Replication
96267 • G Appendix A VTL command line reference 205
Resumereplication
iscon resumereplication -s <server-name> [-u <username> -p <password>]
-v <vdevid> [-X <rpc-timeout>]
iscon resumereplication --server-name=<server-name>
[--server-username=<username> --server-password=<password>] --vdevid=<vdevid>
[--rpc-timeout=<rpc-timeout>]
Description:
Thiscomma n d allowsyoutoresume replicationforavirtualdevicethatwas
suspendedbythesuspendreplicationcommand.Thereplicationwillthen betrigge red
bythereplicationpolicyonceitisresumed.
‐v(‐‐source‐vdevid)istheIDofthesourc evirtualtapeontheprimaryservertobe
resumed.
‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and30000inseconds
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountoftime
specifiedif theserverdoesnotrespond.ThedefaultRPCtimeoutis30seconds.
Setreplicationproperties
iscon setreplicationproperties -s <server-name> [-u <username> -p <password>]
-v <source-vdevid> [-w <watermark(MB)> | [-d <YYYYMMDDHHMM> -i <#[H|M]>]] |
[-r <on|off>] [[-t <timeout>] [-I <retry-in]>] [-C <retry-for>]] [-c
<on|off>]
[-e <on|off>] [-X <rpc-timeout>]
iscon setreplicationproperties --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
--source-vdevid=<source-vdevid>
[--watermark=<watermark(MB)> | [--date=<YYYYMMDDHHMM> --interval=<#[H|M]>]] |
[--repl-first <on|off>] [[--replication-timeout=<timeout>] [--replication-
retry-interval=<retry-in>] [--replication-retry-count=<retry-for]][--
compression=<on|off>]
[--encryption=<on|off>] [--rpc-timeout=<rpc-timeout>]
Description:
Thiscomma n d allowsyoutochangethereplicationpolicyforthespecifiedvirtual
tape.
‐v(‐‐source‐vdevid)isrequired tospecifytheIDofthesourcevirtualtape.
Anycombinationofthefollowingtwooptionscanbeusedtosetupareplication
triggerpolicyforavirtualwiththe
tapecachingpropertydisabled.