- Sun Storage Virtual Tape Library VTL User Guide

Import/Export
198 VTL User Guide • May 2008 G • 96267
Description:
Thiscomma n d exportstheinformationfromavirtualtapetoaphysicaltape.
‐v(‐‐vdevid)isrequiredtospecifythe IDofthevirtualtapetobeexportedtothe
physical tape.
‐L(‐‐tape‐li brary ‐vid) isalsorequiredtospecifytheIDofthetargetphysicaltape
library.
Oneofthethreeex portmethodsbelowisrequiredtoselect thephysicaltape s:
■ ‐b(‐‐same‐barcode)istheoptiontoselectaphysical tapewiththesamebarcode
ofthevirtualtapeifaphysic al tapewiththesamebarcodeexists.
■ ‐B(‐‐barcod e)istheoptiontospec i fythebarcod eofanavailablephysicaltapein
thephysicaltapelibrary.
■ ‐l(‐‐slot‐no)istheoptiontospecifytheslotnum berofanavailablephysicaltape
inthephysicaltapelibrary.
‐M(‐‐export‐mod e)isanoptionwithoneofthefollowingvalues:copy(default)or
move.
‐Y(‐‐delay‐dele te‐days)isanoptionformovemode
tospecifythenumberofdaysto
waitbeforedeletion.Themaximumis365days.Th edefaultvalueis365days.
‐j(‐‐job‐description)isanoptiontospecifyadescriptionforthetapeexport job.
‐f(‐‐force)isrequiredwhenthetapeis scheduledtobe deleted.
‐
J(‐‐auto‐eject‐to‐ie)isanoptiontoejectthetapetotheIEslotaftertheexportjob.
‐k(‐‐key‐name)and‐W(‐‐key‐pas sword)areoptionsfortapeencryptionsupport.
Specifythekeynameandkeypasswordoftheencryptionkeyifyouwishto
encrypt
thedatawhenexportingthevirtualtapetothephysicaltape.
‐Z(‐‐tape‐duplication)isanoptiontoenabletapedupl ic a ti on withthefollowing
value:on.
‐Q(‐‐num‐of‐copies)isanoptiontospeci fythenumberofcopiestobemadeusing
thesamebarcodeif
thetape duplicationoptio n isenabled. Themaximumvalueis5.
Thedefaultvalueis1.
‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and30000inseconds
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountof time
specifiedif
theserverdoesnotrespond.ThedefaultRPCtimeoutis30seconds.
Getimport/exportjobstatus
iscon getimportexportjobstatus -s <server-name> [-u <username> -p <password>]