- Sun Storage Virtual Tape Library VTL User Guide

ManualsBrandsSun Microsystems ManualsNetwork RouterVirtual Tape Library

201

202

203

204

205

206

207

208

209

210

Virtual devices / Clients

96267 • G Appendix A VTL command line reference 187

-v <vdevid> -Z <on|off> -Q <num-of-copies> [-X <rpc-timeout>]

iscon setvirtuallibrarytapeduplication --server-name=<server-name>

[--server-username=<username> --server-password=<password>]

--vdevid=<vdevid> --tape-duplication=<on|off> --num-of-copies=<num-of-copies>

[--rpc-timeout=<rpc-timeout>]

Description:

Thiscomma n d setstheTapeDuplicationpropertyforavirtualtapelibrary.

‐v(‐‐vdevid)isrequiredinorderto identifythevirtuallibra ry.

‐Z(‐‐tape‐duplication)isrequiredinordertoenableordisabletheTapeDuplication

property:on(enable)oroff(disable).

‐Q(‐‐num‐of‐copies)is

anoptiontospecif ythenumberofcopiestobemade using

thesamebarcodeiftapeduplicationoptionisenabled.Themaximumvalueis5.The

defaultvalueis1.

ThevirtuallibrarymusthavetheAuto ArchiveorTapeCachingpropertyenable din

ordertoenabletapeduplication.

‐X

(‐‐rpc‐timeout)isanoptiontospecifyanumber between1and30000secondsfor

theRPCtimeout.Thesystemwillretrythecommandfortheamountoftime

specifiedif theserverdoesnotrespond.ThedefaultRPCtimeoutis30seconds.

Settapeproperties

iscon settapeproperty -s <server-name> [-u <username> -p <password>]

-v <vdevid> [-B <barcode>] [-f] [-F] [-w <on|off>] [-A <auto-archive-mode> [-

Y <days>]

[-J <on|off>] | -N <auto-repl-mode> -S <target-name>

[-U <target-username> -P <target-password>]

[-M <#[D|H|M]>] ] [-k <key-name> -W <key-password> | -d]

[-Z <on|off> -Q <num-of-copies>] [-X <rpc-timeout>]

iscon settapeproperty --server-name=<server-name>

[--server-username=<username> --server-password=<password>] --vdevid=<vdevid>

[--barcode=<barcode>] [--force] [--full-capacity] [--tape-write-

protect=<on|off>]

[--auto-archive-mode=<auto-archive-mode> [--delay-delete-days=<days>]

[--auto-eject-to-ie] | --auto-replication=<auto-repl-mode> --target-

name=<target-name>

[--server-username=<username> --server-password=<password>]

[--delay-delete-time=<#[D|H|M]>] ] [--key-name=<key-name> --key-pasword=<key-

password> |

--disable-key] [--tape-duplication=<on|off> --num-of-copies=<num-of-copies>]

[--rpc-timeout=<rpc-timeout>]