- Sun Storage Virtual Tape Library VTL User Guide

ManualsBrandsSun Microsystems ManualsNetwork RouterVirtual Tape Library

191

192

193

194

195

196

197

198

199

200

Virtual devices / Clients

96267 • G Appendix A VTL command line reference 179

‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and30000inseconds

fortheRPCtimeout.Thesystemwillretrythecommandfortheamountoftime

specifiedif theserverdoesnotrespond.ThedefaultRPCtimeoutis30seconds.

Getsupportedvirtualdrives

iscon getsupportedvdrives -s <server-name> [-u <username> -p <password>]

[-l [-M <output-delimiter>] ] [-X <rpc-timeout>]

iscon getsupportedvdrives --server-name=<server-name>

[--server-username=<username> --server-password=<password>]

[--longlist [--output-delimiter=<output-delimiter>] ] [--rpc-timeout=<rpc-

timeout>]

Description:

Thiscomma n d retrievesinformationaboutallsupportedvirtualtapedrives.

‐l(‐‐longli st )canbespecifiedtogetthesupporteddrivein formati on inalong

format.Thedefaultistodisplaythe informationinalistformat.

‐M(‐‐output‐delimiter)canbespecifiedwh en‐lisspecifiedtoreplacethe

linefeed

withthespecifieddelim iter.Themaximumlengthofthedelimiteris8.

‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1and30000inseconds

fortheRPCtimeout.Thesystemwillretrythecommandfortheamountoftime

specifiedif theserverdoes

notrespond.ThedefaultRPCtimeoutis30seconds.

Createvirtualtapelibrary

iscon createvirtuallibrary -s <server-name> [-u <username> -p <password>]

-t <vlib-type> [-n <vlib-name>] -d <vdrive-type> [-r <vdrive-name-prefix>]

[-R <num-of-drives>] [-A <auto-archive-mode> [-Y <days>] [-J] | -N <auto-

repl-mode>

-S <target-name> [-M <#[D|H|M]>] ] [-B <barcode-range>] [-T <num-of-slots>]

[-E <import-export-slots>] [-D -I <initial-size> -C <increment-size>]

[-m <max-capacity>] [-L <on|off>] [-k <key-name> -W <key-password>] [-X <rpc-

timeout>]

iscon createvirtuallibrary --server-name=<server-name>

[--server-username=<username> --server-password=<password>]

--vlib-type=<vlib-type> [--vlib-name=<vlib-name>] --vdrive-type=<vdrive-type>

[--vdrive-name-prefix=<vdrive-name-prefix>] [--num-of-drives=<num-of-drives>]

[--auto-archive-mode=<auto-archive-mode> [--delay-delete-days=<days>]

[--auto-eject-to-ie] | --auto-replication=<auto-repl-mode> --target-

name=<target-name>

[--delay-delete-time=<#[D|H|M]>] ] [--barcode=<barcode-range>]

[--num-of-slots=<num-of-slots>] [--import-export-slots=<import-export-slots>]