- Sun Storage Virtual Tape Library VTL User Guide

Virtual devices / Clients
96267 • G Appendix A VTL command line reference 173
‐C(‐‐long‐client‐list)displaystheassignedclientlistwhen‐l(‐‐longlist)optionis
specified.
‐M(‐‐output‐delimiter)canbespecifiedwh en‐lisspecifiedtoreplacethelinefeed
withthespecifieddelim iter.Themaximumlengthofthedelimiteris8.
‐X(‐‐rpc‐timeout)isan
optiontospecifyanumberbetween1and30000insec onds 
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountoftime
specifiedif theserverdoesnotrespond.ThedefaultRPCtimeoutis30seconds.
GetClientvirtualdevicelist
iscon getclientvdevlist -s <server-name> [-u <username> -p <password>]
-c <client-name> [-t <client-type>] [-l [-M <output-delimiter>] ]
[-X <rpc-timeout>]
iscon getclientvdevlist --server-name=<server-name>
[--server-username=<username> --server-password=<password>]
--client-name=<client-name> [--client-type=<client-type>]
[--longlist [--output-delimiter=<output-delimiter>] ] [--rpc-timeout=<rpc-
timeout>]
Description:
Thiscommandret rievesan ddisplaysinformationaboutallvirtualdevicesassigned
totheclientfromthespecified server. Th edefaultoutputformatisalistwith
heading .Use‐c(‐‐client‐name)tospecify aclientnameor*forallclients.‐t(client‐
type)isthetypeoftheclient
pr otocoltoberetrievedinoneofthefollowingvalues:
SCSI,FC,orISCSI.Theclienttype willonly takeeffectwhentheclientnameis *.Be
awarethatinsomeplatformsyouarerequiredtoenclosetheʺ*ʺindoublequoteto
takeitasalite ral.
‐l(‐‐longlist)isanoptiontodisplaythelongformat.
‐M(‐‐output‐delimiter)canbespecifiedwh en‐lisspecifiedtoreplacethelinefeed
withthespecifieddelim iter.Themaximumlengthofthedelimiteris8.
‐X(‐‐rpc‐timeout)isanoptiontospecifyanumberbetween1
and30000inseconds
fortheRPCtimeout.Thesystemwillretrythecommandfortheamountoftime
specifiedif theserverdoesnotrespond.ThedefaultRPCtimeoutis30seconds.