- Sun Storage Virtual Tape Library VTL User Guide

Managing VTL servers
96267 • G Chapter 4 VTL operations 141
2. SelecttheSNMP Maintenancetab.
3. Indicate theinformationthatshouldbeincludedintrapssenttoyourSNMP
manager.
SysLocation‐Enterthelocationthatshouldbeincludedintraps.
SysContact‐Enterany contactinformationthatshouldbeincludedintraps.This
couldbeanameoranem ailaddress.
4. Specifythetypeof
messagethatshouldbesent.
Fivelevelsofmessagesareavailable:
■ None:nomessageswillbesent.
■ Critical:only criticalerrorsthatstop thesystemfromoperatingproperlywill
besent.
■ Error:errors(failuresuchasaresourceisnotavailable oranoperationhas
failed)andcriticalerrorswillbesent.
■ Warning:warnings(somethingoccurredthatmayrequiremaintenanceor
correctiveaction),errors,andcriticalerrorswillbesent.
■ Information:informationalmessages,errors,warnings,andcriticalerror
messageswillbesent.
5. ClickAddtoente rthenameofyourSNMPserveran davalidSNMPcommun ity
name.
6. ToverifythatSNMPtrapsaresetupproperly, settheleveltoInformational
andthendoanythingthatcausesanentrytobe
addedtotheeventlog(suchas
loggingintotheVTLconsoleorcreatinganewvirtualtapelibraryorvirtualtape
drive).
YoushouldseeanSNMPtrapfortheevent.
Stophere.