Tape Library Hardware Operator's Guide

95693 Revision P 3-13
Operating in Manual Mode
Rotating the Z Column
CAUTION:
Potential equipment damage: The Z column does not rotate a full 360
degrees. If you meet resistance when rotating it, do not force it. Rotate
the Z column in the opposite direction.
If you need to rotate the Z column, grasp it and carefully rotate it, as shown in Figure 3-5.
If the Z column meets resistance and stops before the desired position is reached, it has
contacted a stopping mechanism. Rotate the Z column in the opposite direction.
Figure 3-5. Rotating the Z Column (E62023)
E6202
3