User's Guide SBus Adapter SunSwiftTM

3-6 SunSwift SBus Adapter Installation and User’s Guide—January 1996
3
3.5 Booting
The following sections discuss various ways of booting. See the section that
applies to your specific needs.
3.5.1 Booting From the Network Using Solaris 2.5
To use the SunSwift SBus Adapter Ethernet interface as the boot device for
Solaris 2.5 systems, perform the following tasks.
1. At the ok prompt type:
The show-devs command lists the system devices. You should see the full
path name of the hme device, similar to the example below:
2. At the ok prompt type:
ok show-devs
/iommu@f,e0000000/sbus@f,e0001000/SUNW,hme@3,8c00000
ok boot (full path name of the hme device)