Fast Ethernet PCI Adapter Installation and User's Guide

Appendix B Configuring the Quad FastEthernet Device Driver Parameters 33
● To list all the parameters supported by the qfe driver, type ndd /dev/qfe \?.
(See
TABLE B-1 through TABLE B-8 for parameter descriptions.)
FIGURE B-1 Example of Listing All Parameters Supported by the qfe Driver
# ndd /dev/qfe \?
? (read only)
transceiver_inuse (read only)
link_status (read only)
link_speed (read only)
link_mode (read only)
ipg1 (read and write)
ipg2 (read and write)
use_int_xcvr (read and write)
pace_size (read and write)
adv_autoneg_cap (read and write)
adv_100fdx_cap (read and write)
adv_100hdx_cap (read and write)
adv_10fdx_cap (read and write)
adv_10hdx_cap (read and write)
autoneg_cap (read only)
100fdx_cap (read only)
100hdx_cap (read only)
10fdx_cap (read only)
10hdx_cap (read only)
lp_autoneg_cap (read only)
lp_100fdx_cap (read only)
lp_100hdx_cap (read only)
lp_10fdx_cap (read only)
lp_10hdx_cap (read only)
instance (read and write)
lance_mode (read and write)
ipg0 (read and write)
#