Fast Ethernet PCI Adapter Installation and User's Guide

14 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide • August 1997
Booting From the Network
To use a Sun Quad FastEthernet PCI adapter ethernet interface as the boot device,
perform the following tasks:
1. At the ok prompt type:
The show-devs command lists the system devices. You should see the full path
name of the qfe devices, similar to the example below:
Note – You need to select only one of these qfe devices for booting.
2. At the ok prompt type:
ok show-devs
/pci@1f,2000/pci@2/SUNW,qfe@0,1
/pci@1f,2000/pci@2/SUNW,qfe@1,1
/pci@1f,2000/pci@2/SUNW,qfe@2,1
/pci@1f,2000/pci@2/SUNW,qfe@3,1
ok boot (full path name of the qfe device)