Whiteboard Accessories User Manual

68 Sun Crypto Accelerator 4000 Board Installation and User’s Guide May 2003
To Initialize the Sun Crypto Accelerator 4000
Board to Use an Existing Keystore
1. Enter vcaadm at a command prompt of the system with the Sun Crypto
Accelerator 4000 board installed or enter vcaadm -h hostname if the system is
remote, and select 2 to restore the board from a backup:
2. Enter the path and password to the backup file:
3. Verify the configuration information:
# vcaadm -h hostname
This board is uninitialized.
You will now initialize the board. You may
either completely initialize the board and
start with a new keystore or restore the board
using a backup file.
1. Initialize the board with a new keystore
2. Initialize the board to use an existing keystore
Your Choice (0 to exit) --> 2
Enter the path to the backup file: /tmp/board-backup
Password for restore file:
Board restore parameters:
-----------------------------------------------------
Path to backup file: /tmp/board-backup
Keystore name: keystore_name
-----------------------------------------------------
Is this correct? (Y/Yes/N/No) [No]: y
Restoring data to crypto accelerator board...