Whiteboard Accessories User Manual
Chapter 4 Administering the Sun Crypto Accelerator 4000 Board With the vcaadm and vcadiag Utilities 65
When not in vcaadm Interactive mode, the “?” character could be interpreted by the
shell in which you are working. In this case, be sure to use the command shell
escape character before the question mark.
Quitting the vcaadm Program in Interactive Mode
Two commands allow you to exit from vcaadm: quit and exit. The Ctrl-D key
sequence also exits from vcaadm.
Initializing the Sun Crypto Accelerator
4000 Board With vcaadm
The first step in configuring a Sun Crypto Accelerator 4000 board is to initialize it.
When you initialize a board it is necessary to create a keystore, refer to “Concepts
and Terminology” on page 86. You can either initialize the Sun Crypto Accelerator
4000 board with a new keystore or use a backup file to initialize the board to use an
existing keystore.
When you first connect to a Sun Crypto Accelerator 4000 board with vcaadm, you
are prompted to initialize the board with a new keystore or initialize the board to
use an existing keystore which is stored in a backup file. vcaadm prompts you for all
of the required information for either type of board initialization.