Whiteboard Accessories User Manual

Chapter 4 Administering the Sun Crypto Accelerator 4000 Board With the vcaadm and vcadiag Utilities 61
vcaadm Prompt
The vcaadm prompt in Interactive mode is displayed as follows:
The following table describes the vcaadm prompt variables:
Logging Out of a Board With vcaadm
If you are working in Interactive mode, you may want to disconnect from one board
and connect to another board without completely exiting vcaadm. To disconnect
from a board and logout, but remain in Interactive mode, use the logout command:
vcaadm{vcaN@hostname, sec_officer}> command
TABLE 4-2 vcaadm Prompt Variable Definitions
Prompt Variable Definition
vcaN vca is a string that represents the Sun Crypto Accelerator 4000
board. N is the device instance number (unit address) that is in the
device path name of the board. Refer to “To Set Driver Parameters
Using a vca.conf File” on page 38 for details on retrieving this
number for a device.
hostname The name of the host for which the Sun Crypto Accelerator 4000
board is physically connected. hostname may be replaced with the
physical host’s IP address.
sec_officer The name of the security officer that is currently logged in to the
board.
vcaadm{vcaN@hostname, sec_officer}> logout
vcaadm>