Whiteboard Accessories User Manual

Chapter 3 Configuring Driver Parameters 51
To Check Link Partner Settings
As superuser, type the kstat vca:N command:
Note In the previous example, N is the instance number of the vca device. This
number should reflect the instance number of the board for which you are running
the kstat command.
rx-rel-flow Number of times the driver was told to release
a flow.
Unstable
Ethernet PCI Properties
rev-id Revision ID of the Sun Crypto Accelerator
4000 Ethernet device useful for recognition of
device being used in the field.
Unstable
pci-err Sum of all PCI errors. Unstable
pci-rta-err Number of target aborts received. Unstable
pci-rma-err Number of master aborts received. Unstable
pci-parity-err Number of PCI parity errors detected. Unstable
pci-drto-err Number of times the delayed transaction retry
time-out was reached.
Unstable
dma-mode Used by the Sun Crypto Accelerator 4000
driver (vca).
Unstable
# kstat vca:N
module: vca instance: 0
name: vca0 class: misc
TABLE 3-18 Driver-Specific Parameters (Continued)
Parameter Description Stable or Unstable