Whiteboard Accessories User Manual

26 Sun Crypto Accelerator 4000 Board Installation and User’s Guide May 2003
The Sun Crypto Accelerator 4000 UTP adapter advertised link parameters are
different from those of the Sun Crypto Accelerator 4000 MMF adapter as shown in
TABLE 3-2.
TABLE 3-2 Operational Mode Parameters
Parameter Description
The following parameter is for both the Sun Crypto Accelerator 4000 UTP and MMF adapters.
adv-autoneg-cap Local interface capability advertised by the hardware
0 = Forced mode
1 = Autonegotiation (default)
The following parameter is for the Sun Crypto Accelerator 4000 MMF adapter only.
adv-1000fdx-cap Local interface capability advertised by the hardware
0 = Not 1000 Mbps full-duplex capable
1 = 1000 Mbps full-duplex capable (default)
The following parameter is for both the Sun Crypto Accelerator 4000 UTP and MMF adapters.
adv-1000hdx-cap Local interface capability advertised by the hardware
0 = Not 1000 Mbps half-duplex capable
1 = 1000 Mbps half-duplex capable (default)
The following parameters are for the Sun Crypto Accelerator 4000 UTP adapter only.
adv-100fdx-cap Local interface capability advertised by the hardware
0 = Not 100 Mbps full-duplex capable
1 = 100 Mbps full-duplex capable (default)
adv-100hdx-cap Local interface capability advertised by the hardware
0 = Not 100 Mbps half-duplex capable
1 = 100 Mbps half-duplex capable (default)
adv-10fdx-cap Local interface capability advertised by the hardware
0 = Not 10 Mbps full-duplex capable
1 = 10 Mbps full-duplex capable (default)
adv-10hdx-cap Local interface capability advertised by the hardware
0 = Not 10 Mbps half-duplex capable
1 = 10 Mbps half-duplex capable (default)