Whiteboard Accessories User Manual
8 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
LED Displays
See TABLE 1-5.
Note – The service pack numbers (SP9 or SP1) are implied whenever Sun ONE Web
Server 4.1 or 6.0 is mentioned.
TABLE 1-5 Front Panel Display LEDs for the UTP Adapter
Label Meaning if Lit Color
Fault On when the board is HALTED (fatal error)
state or low level hardware initialization
failed.
Flashing if an error occurred during the
boot process.
Red
Diag On in POST, DIAGNOSTICS, and
FAILSAFE (firmware not upgraded) state.
Flashing when running DIAGNOSTICS.
Green
Operate On in POST, DIAGNOSTICS, and
DISABLED (driver not attached) state.
Flashing in IDLE, OPERATIONAL, and
FAILSAFE states.
Green
Init On if the security officer has initialized the
board with vcaadm. See “Initializing the
Sun Crypto Accelerator 4000 Board With
vcaadm” on page 65.
Flashing if the ZEROIZE jumper is present.
Green
FIPS Mode On when operating in FIPS 140-2 level 3
certified mode. Off when in non-FIPS
mode.
Green
1000 Indicates Gigabit Ethernet. Green
Activity (no label) Link is transmitting or receiving. Amber
Link (no label) Link up. Green