Whiteboard Accessories User Manual

xxiii
Preface
The Sun Crypto Accelerator 4000 Board Installation and Users Guide lists the features,
protocols, and interfaces of the Sun™ Crypto Accelerator 4000 board and describes
how to install, configure, and manage the board in your system.
This book assumes that you are a network administrator with experience
configuring one or more of the following: Solaris™ operating environment, Sun
platforms with PCI I/O cards, Sun™ ONE and Apache Web Servers, IPsec,
SunVTS™ software, and certification authority acquisitions.
How This Book Is Organized
This book is organized as follows:
Chapter 1 lists the product features, protocols, and interfaces of the Sun Crypto
Accelerator 4000 board, and describes the hardware and software requirements.
Chapter 2 describes how to install and remove the Sun Crypto Accelerator 4000
hardware and software.
Chapter 3 defines the Sun Crypto Accelerator 4000 tunable driver parameters and
describes how to configure them with the ndd utility and the vca.conf file. This
chapter also describes how to enable autonegotiation or forced mode for link
parameters at the OpenBoot™ PROM interface and how to configure the network
hosts file.
Chapter 4 describes how to configure the Sun Crypto Accelerator 4000 board and
manage keystores with the vcaadm and vcadiag utilities.
Chapter 5 explains how to configure the Sun Crypto Accelerator 4000 board for
use with Sun ONE Web Servers.
Chapter 6 explains how to configure the Sun Crypto Accelerator 4000 board for
use with Apache Web Servers.