Whiteboard Accessories User Manual
Appendix G Frequently Asked Questions 169
▼ To Assign Different MAC Addresses From a Terminal
Window
1. Enter the following command:
Note – With the “local-mac-address?” parameter set to true, all nonintegrated
network interface devices use the local MAC address assigned to the product at the
manufacturing facility.
2. Reboot the system.
▼ To Assign Different MAC Addresses From the OpenBoot
PROM Level
1. Enter the following command at the OBP prompt:
Note – With the “local-mac-address?” parameter set to true, all nonintegrated
network interface devices use the local MAC address assigned to the product at the
manufacturing facility.
2. Boot the operating environment.
How Can I Configure the Sun Crypto Accelerator 1000 for
Use With Apache After I Have Installed the Sun Crypto
Accelerator 4000 Software?
Once the SUNWkcl2a software package is installed, the system will be configured
with Apache Web Server mod_ssl 1.3.26.
If you want to configure Sun Crypto Accelerator 1000 with Apache, you must have
the following patches.
To configure the Sun Crypto Accelerator 1000 for use with Apache 1.3.26 on a Solaris
8 system with the SUNWkcl2a package installed, you need the following patches:
■ For Apache 1.3.26 – Patch ID 109234-09 or later
# eeprom ”local-mac-address?”=true
ok setenv local-mac-address? true