Whiteboard Accessories User Manual
Chapter 5 Configuring Sun ONE Server Software for Use With the Sun Crypto Accelerator 4000 Board 101
Note – The default server_port is 443.
Installing and Configuring Sun ONE
Web Server 6.0
This section explains how to enable the Sun Crypto Accelerator 4000 board for use
with Sun ONE 6.0 Web Servers. This section includes the following:
■ “Installing Sun ONE Web Server 6.0” on page 101
■ “Configuring Sun ONE Web Server 6.0 for SSL” on page 108
Installing Sun ONE Web Server 6.0
You must perform these procedures in order. Refer to the Sun ONE Web Server
documentation for more information about using Sun ONE Web Servers.
▼ To Install Sun ONE Web Server 6.0
1. Download the Sun ONE Web Server 6.0 software.
You can find the web server software at the following URL:
http://www.sun.com/
2. Install the web server.
This section includes instructions for one example, you may decide to configure
your Sun ONE Web Server differently. The default path name for the server is:
/usr/iplanet/servers
Accept the default path during the Sun ONE Web Server installation. This book
refers to the default paths. If you decide to install the software in a different location,
be sure to note where you installed it.
3. Run the setup program.
4. Answer the prompts in the installation script.
Except for the following prompts, you can accept the defaults for ease of use:
a. Agree to accept the license terms by typing yes.
b. Enter a fully qualified hostname.domain.