Computer Hardware User Manual

TCP/IP HL7 V3 Adapter Inbound Connectivity Map Properties
The TCP/IP HL7 V3 Server inbound adapter conguration properties are organized into the
following sections on the Properties Editor accessed from the Connectivity Map:
■
“General Inbound Settings — TCP/IP HL7 V3 Inbound Adapter” on page 64
■
“TCPIP Inbound Settings — TCP/IP HL7 V3 Inbound Adapter” on page 65
■
“TCPIP Inbound Settings - Server Port Binding — TCP/IP HL7 V3 Inbound Adapter” on
page 68
■
“TCPIP Inbound Settings - Client Connection Establishment — TCP/IP HL7 V3 Inbound
Adapter” on page 69
■
“TCPIP Inbound Settings - Inbound Connection Management — TCP/IP HL7 V3 Inbound
Adapter” on page 69
■
“TCPIP Inbound Schedules - Listener Schedule — TCP/IP HL7 V3 Inbound Adapter” on
page 70
■
“TCPIP Inbound Schedules - Service Schedule — TCP/IP HL7 V3 Inbound Adapter” on
page 71
■
“HL7 Acknowledgment — TCP/IP HL7 V3 Inbound Adapter” on page 73
■
“Lower Layer Protocol — TCP/IP HL7 V3 Inbound Adapter” on page 73
■
“Sequence Number Protocol — TCP/IP HL7 V3 Inbound Adapter” on page 74
■
“HL7v3 Transmission Wrapper — TCP/IP HL7 V3 Inbound Adapter” on page 74
■
“Communication Control — TCP/IP HL7 V3 Inbound Adapter” on page 75
■
“HL7 Recourse Action — TCP/IP HL7 V3 Inbound Adapter” on page 77
■
“Schematron Validation — TCP/IP HL7 V3 Inbound Adapter” on page 79
General Inbound Settings — TCP/IP HL7 V3 Inbound
Adapter
The following table lists and describes the TCP/IP HL7 V3 inbound adapter properties that
appear on the General Inbound Settings page of the Properties Editor accessed from the
Connectivity Map.
TABLE 27 Connectivity Map - General Inbound Settings (V3)
Name Description
Max Data Size A number that indicates the maximum amount of data that the programs can
hold internally. The valid range is a numeric value from 1 to 2147483647 bytes
(2GB), which is the maximum value of a Java integer.
TCP/IP HL7V3 Adapter Inbound Connectivity Map Properties
Sun Adapter for TCP/IP HL7 User's Guide • October 200964