Computer Hardware User Manual

TABLE 26 Connectivity Map - HL7 Recourse Action (Continued)
Name Description
Action on Nak Received The action the adapter takes when it receives an HL7 Application NAK from the
external system. Select one of the following options:
■
Resend – The adapter attempts to resend the message to the external system.
■
Reset – The adapter closes its connection with the external system and goes
through the connection scenario.
■
Skip Message – The adapter remains connected, but writes the message to an
error queue.
Note – Do not set both the Action On NAK Received and Action On Max NAK
Received properties to Skip Message.
This property is used for outbound Collaboration code.
Action on Max Nak
Received
The action the adapter takes when the maximum number of HL7 Application
NAKs have been received from the external system, as set by the Max NAK
Receive Retry property (see
Communication Control). Select one of the
following options:
■
Exit – The adapter terminates its connection with the external system and
shuts down.
■
Reset – The adapter closes its connection with the external system and goes
through the connection scenario.
■
Skip Message – The adapter remains connected, but writes the message to an
error queue.
This property is used for outbound Collaboration code.
Note – Do not set both the Action On NAK Received and Action On Max NAK
Received properties to Skip Message.
Action on Max Nak Sent The action the adapter takes when it has sent the maximum allowed number of
NAKs to the external system, as set by the Max NAK Send Retry parameter (see
Communication Control). Select one of the following options:
■
Exit – The adapter terminates its connection with the external system and
shuts down.
■
Reset – The adapter closes its connection with the external system and goes
through the connection scenario.
This property is used for inbound Collaboration code.
TCP/IP HL7V2 Adapter Outbound Connectivity Map Properties
Sun Adapter for TCP/IP HL7 User's Guide 63