Computer Hardware User Manual

TABLE 23 Connectivity Map - HL7 MSH Segment (Continued)

Name Description

Conformance Statement

A unique identier that applies to a query’s conformance statement. It can also be

used as a Message Prole Identier to assert constancy with a message prole

(grammar, syntax, usage, and so on).

This is the 21st eld in the HL7 MSH segment (MSH-21).

Validate MSH An indicator of whether to validate the MSH segment of the data message (for

inbound) and the MSH segment of the ACK (for outbound). Select true if you

want the Collaboration to validate the MSH segment; otherwise select false.

This parameter is used in Collaboration code.

Note – This property does not aect structural validation of the entire HL7

message itself. Structural validation is always performed.

HL7 SFT Segment — TCP/IP HL7 V2 Outbound Adapter

The following table lists and describes the properties that appear on the HL7 SFT Segment page

of the Properties Editor accessed from the Connectivity Map. These properties dene the

conguration of the SFT segment of the HL7 message, which provides additional information

about one or more software products used as sending applications. The primary purpose of this

segment is for diagnostic use. There may be additional uses per site-specic agreements. For

more information about this segment, refer to the HL7 specication (

http://www.hl7.org).

Note – The SFT segment is available starting with HL7 version 2.5.

TABLE 24 Connectivity Map - HL7 SFT Segment

Name Description

Enable An indicator of whether the SFT optional segment is enabled in the ACK. Select

true to enable the segment; otherwise select false.

Note – If Enable is set to true, and the HL7 version is not congured as 2.5, the

adapter will error upon startup.

Software Vendor

Organization

The name of the company that publishes or distributes the sending software that

created the transaction. This eld identies the vendor responsible for

maintaining the application. The purpose of this eld, along with the remaining

elds in this segment, is to provide a more complete prole of the sending

applications.

This is the rst eld in the HL7 SFT segment (SFT-01).

TCP/IP HL7V2 Adapter Outbound Connectivity Map Properties

Sun Adapter for TCP/IP HL7 User's Guide 59