User manual

Sun SNMP Management Agent Addendum for the Netra 440 Server 9
➥ PS 2 Okay-To-Remove Indicator FIGURE 3 – item 20 and item 14
PS 2 Active Indicator
FIGURE 3 – item 20 and item 12
PS 2 Service-Required Indicator
FIGURE 3 – item 20 and item 13
PS 2 Over-Current Fault Monitor
PS 2 Fan Under-Speed Fault Monitor
PS 2 Over-Voltage Fault Monitor
PS 2 Under-Voltage Fault Monitor
PS 2 Power Inlet Presence Monitor
PS 2 Over-Temperature Fault Monitor
➥ Power Supply 3 Bay (left - viewed from rear) FIGURE 3 – item 23
➥ Power Supply 3 FIGURE 3 – item 23
➥ PS 3 Okay-To-Remove Indicator FIGURE 3 – item 23 and item 14
PS 3 Active Indicator
FIGURE 3 – item 23 and item 12
PS 3 Service-Required Indicator
FIGURE 3 – item 23 and item 13
PS 3 Over-Current Fault Monitor
PS 3 Fan Under-Speed Fault Monitor
PS 3 Over-Voltage Fault Monitor
PS 3 Under-Voltage Fault Monitor
PS 3 Power Inlet Presence Monitor
PS 3 Over-Temperature Fault Monitor
➥ System Configuration Card Reader FIGURE 1 – item 4
➥ System Configuration Card FIGURE 1 – item 4
➥ DVD Drive Bay FIGURE 1 – item 6
➥ DVD Drive FIGURE 1 – item 6
➥ Power Distribution Module Bay FIGURE 1 – item 7
➥ Power Distribution Module FIGURE 1 – item 7
Ethernet Port 0 (left - viewed from rear)
FIGURE 3 – item 19
Ethernet Port 1 (right - viewed from rear)
FIGURE 3 – item 18
* The SNMP model may show frequency values for slots 1 - 4 that are different from those shown in this table; if that is the case, ignore
the frequency values shown in the SNMP model, and use the frequency values shown in this table and the regular Netra 440 server
labels and documents instead. Refer to the Netra 440 Server Release Notes for more information.
† While the service-required indicator is represented in the containment model, it is not supported.
TABLE 1
Netra 440 Server Containment Model (Hierarchy) (Continued)
Model Description For Location, See: