- Sun Installation and User's Guide Dual Port 4x IB Host Channel Adapter PCI-X

Chapter 2 Adapter Installation 9

This completes the hardware installation. Proceed to the verification instructions in

“Verifying the Installation” on page 9.

FIGURE 2-1 Typical Adapter-to-Switch Configuration

▼ Verifying the Installation

Before you can verify the installation, you must install the adapter in the chassis,

power the server, and cable it to an operational InfiniBand switch. The InfiniBand

switch should automatically recognize InfiniBand servers when they are connected

to the fabric.

1. Check that the green LED is illuminated for each port that is connected to the

switch.

If the green LED is not on, check the cable connections at the adapter and at the

switch. Also check if the Tavor driver is attached to the port. See “Troubleshooting

Tasks” on page 25 for details.

Sun 9-Port InfiniBand switch

Sun server