User manual

Chapter 3 Section 3.5
Setting SAP BAPI eWay Properties eWay External Properties
eWay™ Adapter for SAP BAPI User’s Guide 37 Sun Microsystems, Inc.
Connection Retry Settings
The following Connection Retry Settings are used:
Connection Pool Settings
The following Connection Pool Settings are used by the external database:
Router String
(optional)
Specifies the router string needed to
access the SAP R/3 Application
Server.
This property is optional; use it only
to gain access to an SAP system that
is behind a firewall.
The string is composed of the
hostnames or IP addresses of all the
SAP routers that are in between this
logical host and the SAP gateway
host. For example, if there are two
routers, saprouter1, and saprouter2,
in order, from the Logical Host to the
SAP R/3, as follows:
saprouter1:
204.79.199.5 saprouter2:
207.105.30.146
The router string in this case is as
follows:
/H/204.79.199.5/H/
207.105.30.146/H/
Do not omit the “/H/” tokens to
begin, separate, and end the routers.
A valid router string.
There is no default setting.
Table 9 Outbound SAP BAPI eWay—Connection Retry Settings
Name Description Required Value
Connection Retries Number of retries to establish a
connection upon failure to acquire
one.
The default is 0.
Connection Retry Interval Milliseconds of pause before each
reattempt to access the SAP system.
Used in conjunction with the
'Connection Retry Count' setting.
The default is 1000.
Table 8 Outbound SAP BAPI eWay— Client Connection Settings
Name Description Required Value