Host Adapter Installation Guide

13
APPENDIX
A
Ultra320 SCSI Configuration
This appendix provides general information about Ultra320 SCSI configuration
rules. The following topics are discussed:
■ “Target Devices” on page 13
■ “Bus Length” on page 14
■ “Cabling and Termination” on page 15
■ “SCSI Symbols” on page 16
Target Devices
For Ultra320 SCSI performance of up to 320 Mbytes/sec, there can be a maximum of
15 devices connected to each port on the host adapter.
The available target addresses (SCSI IDs) for each port on the host adapter are 0
through F.
Note – The SCSI ID of 7 is reserved for the host adapter.